Kitchen Design Series #3 What goes where? Start with the cook top.
Moving from design to build is a huge step. Plan well so you only build it one time. Planning your layout requires detailed design for electrical switches, outlets, lighting, plumbing, gas, appliance fit, and door and drawer clearance. Ask questions, research the issues and plan to meet all building codes whether you are in an area that requires building permits or not. Short cuts in building cause huge headaches later on. My mantra is simple – if I am not going to do it right the first time when will anyone have the time and resources to correct it later. Don’t hurry – research it – do it right. Require your contractors to build to code. Check their work.
Use the task oriented plan for your kitchen design. The areas I looked at include: savory hot cooking, cold food prep, dessert and baking space, food service, leftover and garbage management, dish cleaning and storage, and pantry storage. Use a piece of poster board (or several as I needed) to block off one inch squares to equal one square foot. I used colored paper to make scale foot prints of appliances. Note on the main board where current outlets and utilities are located. Don’t be limited by where the appliances are presently located. The only areas that are not easily moved are drains and gas lines. If those are on outside walls they can be moved some but that adds quite a bit of cost to the project.
Where do you want to be standing while cooking? Savory hot cooking and baking have special requirements. This is a good place to start planning the details for the remodel or new kitchen. The cook top, cook top ventilation, ovens, lighting, electric outlets for the appliances and occasional-use hand held appliances, microwave and warming drawer work best near each other. Savory food prep involves adding oils, spices, water, chopped items, canned or jarred items, draining hot pots, and moving hot vessels on and off of the heating elements. Those all require counter space that can handle heat and cold. Storage should also be close at hand for pots and pans, hot mitts, and utensils including can opener, garlic press, slotted spoons, large spoons, turners, tasting spoons, and some measuring utensils.
The cook spends a great deal of time in this area. That location should be considered relative to other spaces where social interaction will occur. I like being able to see the large TV in the den, look outside and have a window pass-through for hot items on our patio. Moving the cook top from the island facing the dining room to an outside wall where I could enlarge a tiny window to the patio and be in direct line of sight to the den, worked best for me. Stand in the possible areas and look around. Where do you want to spend your time?
Select the appliances you want to work with. I have seen many kitchens outfitted with high end “suites” of appliances from one manufacturer. Some fit the cooking style, while some pose real issues. Note the things that do and do not work well in your current appliances. Then go play house in front of models at stores. No, really. It is hard to compare features on paper.
Start with the stove and ovens. Two ovens is a minimum for resale value of a kitchen. The cook top can be either gas or electric, for resale value. Deciding between a full stove with ovens and cook top, or separate modular units is a matter of space and design. The cost is very close which ever way you choose. Many times separate units give better options for clustering storage closer to where it is needed. My cook top is separate. It was the configuration I wanted which I could not find in a full stove and oven appliance. My utensil drawers and pull out storage for pots and pans are directly below the cook top.
Look at the controls on the cook top. Often the knobs are on the front below the cook top. If the party gathers in the kitchen in your house, as folks lean against the counters and appliances, those knobs can be accidentally turned on. At a house we rent every summer in the mountains I have had moments when shirts or hair were catching fire because the knob started the gas burner. Think of children in the home. Think of pets. The positive side of knobs on the front is a larger cooking surface, however, knobs on top of the cook top may be safer for your lifestyle.
I wanted gas with several burner sizes and a very controllable wide range of heat. One burner size does not fit all pots. It may make a difference to you depending on how you cook. Larger burners with high heat do well heating water for pasta or for soups and stews. Smaller pots for sautes or sauces do not waste energy or burn handles on a medium burner. A small warming burner is a luxury for chocolate melting, sweet or creamy sauces and keeping butter melted without browning. Not all controls are flexible with regard to heat provided. Some controls have fixed heating positions while others allow a range to be determined by the position of the knob. As well, some with the position controls do not really give a fine tuning to the heat provided. Research what brands will give a level of control you want.
Decide how close to the front of the counter you want the front burners. Many larger cook tops, often with front knobs, will have the front burners very close to or right at the edge of the counter top. It is nice for seeing into the pot, not having to reach too far, and allowing room for more large burners. I find my apron/shirt too close on those and I worry about children’s fingers and pet’s noses. Lowering the level of the cook top by just an inch or so while moving it back from the front counter edge is one option. A full stove unit will not give you a choice so comparing brands for burner style and placement is important.
To some cooks the ease of cleaning is a consideration. While I considered that detail when comparing brands, it only effected my choice regarding cook tops that offered integrated griddles, grills and deep fryers. These features are terrific if they fit your cooking style. They take up room and provide cleaning challenges. I use those features rarely and chose to go with a more compact cook top so I could make room for a new pot sink beside the cook top. I do have a griddle and grill that cover two burners for the few times I want to use those features.
Pot filler versus pot sink. A pot filler is a cold water tap that is located over the cook top to allow for pot filling. I have not had a problem with carrying cold water in pots from the sink to the cook top, but carrying a boiling pot across to the main sink is a hassle. The pot sink is a bar sized sink that perfectly fits a strainer with a cold water faucet that extends to fill pots too. We had located the cook top on an outside wall so plumbing a drain and tapping into the cold water feed to the refrigerator was easily done.
Ventilation is a requirement for all cook tops. Several critical factors must be researched to avoid wasting money on something that will never work properly. I have seen gorgeous kitchens with beautiful ventilation units that do not work! Yes, the units operate as manufactured, however, for the beauty of the design they are hung way too high from the cook top to be effective. Read the instructions on the ventilation unit you are considering. How far from the cooking surface must it be to ventilate properly? That is also how far the lights on the unit will provide good coverage. Most ventilation units need to be surprisingly low to work effectively. The width and length of the ventilation unit needs to be the same size as the cooking surface to be effective.
A downdraft vent requires a wall placement. Some have been installed in islands with a below flooring exhaust pipe. Strong air movers really are needed for those vents to function well. grease build up in the bottom of exhaust pipe is a concern as well. There is no good way to clean that. There are downdraft vents placed in the center of the cook top itself which may not work as well overhead vents. They seem to handle the burners next to them with average pot sizes, but they do not vent secondary burners or deep pots very well. The down drafts that do seem to to work well are those that rise from under the counter and are installed exactly next to the back edge of cook top. Manufacturers offer different heights and widths. When buying the cook top or stove buy the ventilation system that matches. Downdraft vents do open up the view across the cook top and allow for a variety of lighting.
All of the units require a separate air mover from the fans themselves. Some brands include the air movers in the design. Air movers work only for a certain length of ventilation exhaust pipe before a larger unit or even a second air mover is required. Planning where the cook top will be located requires planning the ventilation exhaust path.
The design then must respect the look and placement of the vent. Some vents are lovely over an island cook top but know how far down and how wide the vent will have to be to decide if the block on the view is acceptable. Make one of card board to give it a try before you buy.
Add to the plan where the hard wired boxes need to be placed to plug in or direct wire the cook top, ventilation and lights for this area. A note about under-counter outlet placement: some gas cook tops (especially outdoor kitchen cook tops) may be fueled by propane rather than natural gas. Propane is heavier than air and will collected at lower levels in the event of a leak. Natural gas is about the same weight as air and can dissipate fairly easily. Consult with experts before placing electric outlets near gas lines in cabinets.